Subject: Re: 3.0 Amiga is Here!
Date: Mon, 2 May 1994 12:09:21 -0700
From: kkalnasy@bvu-lads.loral.com (Kent Kalnasy)

At 10:36 AM 5/2/94 -0500, DCG9367@tntech.edu wrote:
>VMM40 works fine with Imagine 2.0... But VMM40 definately works.
>I find it MUCH BETTER and FASTER than GigaMem.

At  7:07 AM 5/2/94 -0600, Steve Koren wrote:
>...I have used Imagine 2.0 with VMM040, and it has
>worked flawlessly a large number of times... Worked great for both
>rendering and modeling...  Sure you have a recent version of VMM040?
>This one might be some sort of setup problem instead of an Imagine
>problem.  Or could it be that you're loading old 2.0 projects which
>don't work with 3.0?  I've had _great_ luck using VMM040 with both
>Imagine and Vertex.

Well, at least I now know that I have some kind of conflict.  I was
testing with projects created under 3.0, and I do have the most recent
VMM40, but these were good suggestions.  Time to do some debugging of
my environment.  Thanks for the replies.

>On the topic of screenmodes, has anyone figured out the proper place to
>patch the 3.0 binary to change the resolution?

Sorry, I'm depending on others to figure out this magic.  Some bright
enterprising user will have to post this info.

------------------------------------------------------------------------------
 Kent Kalnasy (speaking only for me)              kkalnasy@bvu-lads.loral.com
 Loral Advanced Distributed Simulation, Inc.             Bellevue, Washington
------------------------------------------------------------------------------




                           -=> RETURN TO CONTENTS!<=-